Cement Based Tile Adhesives
Ceramic Fix Tile Adhesive (Supplied in 20kg bags)
Ceramic Fix 24/48hr Tile Adhesive is a standard setting grey cement-based tile adhesive designed for the fixing of ceramic tiles onto all types of cement-based surfaces as well as other pre-primed surfaces. This product is suitable for both wall & floor applications. The tile adhesive mixed with Tile Tak Tile Bond may also be used to install tile in intermittingly wet areas as well as underwater applications. This product can be used in interior & exterior applications. The Product has a pot life of 90minutes. Drying time 24-48hrs.
Porcelain Fix 24hr Tile Adhesive (Supplied in 20kg bags)
Porcelain Fix 24hr Tile Adhesive is a standard setting high strength grey cement-based tile adhesive is designed for the fixing of porcelain and other non-porous tiles (e.g., natural stones, vitrified etc.) onto all types of cement-based surfaces as well as other pre-primed surfaces. This product is suitable for both wall & floor applications as well as installing tiles in intermittingly wet areas as well as underwater applications. This product can be used in interior & exterior applications. The Product has a pot life of 120 minutes. Drying time 24hrs.
Porcelain 12hr Tile Adhesive (Supplied in 20kg bags)
Porcelain 12hr Tile Adhesive is a quick setting high strength grey cement-based tile adhesive is designed for the fixing of porcelain and other non-porous tiles (e.g., natural stones, vitrified etc.) onto all types of cement-based surfaces as well as other pre-primed surfaces. This product is suitable for both wall & floor applications as well as installing tiles in intermittingly wet areas as well as underwater applications. This product can be used in interior & exterior applications. The Product has a pot life of 120 minutes. Drying time 12hrs.
Rapid Set 6hr Tile Adhesive (Supplied in 20kg bags)
Rapid Set 6hr Tile Adhesive is a quick setting high strength grey cement-based tile adhesive is designed for the fixing of porcelain and other non-porous tiles (e.g., granite, marble, ceramic, natural stones, vitrified etc.) onto all types of cement-based surfaces as well as other pre-primed surfaces. This product is suitable for both wall & floor applications. This product must not be used on porous white or light coloured, natural tiles – a rapid set 6hr white tile adhesive must be used. This product can be used in interior & exterior applications. The Product has a pot life of 90 minutes.
Admixtures & Additives
Tile Bond Latex Additive (Supplied in 1lt/5lt/20lt bottles)
Tile Bond Latex Additive is an acrylic latex cement additive designed to increase the water resistance, flexural & adhesion strengths of cement-based powders like tile adhesive, self-levelling screeds, and cement-based plasters and screeds. Tile Bond is recommended for use in heavy duty tiling applications, permanently wet applications and exterior applications exposed to harsh weather conditions. Tile Bond is also suitable for the priming of friable and chalking plasters.
Features
- Waterproofs cement-based products
- Increases intercoat adhesion
- Increase Flexibility
Tile Key Latex Additive (Supplied in 1lt/5lt/20lt bottles)
Tile Key Latex Additive is an acrylic latex cement to increase water resistance, flexual & adhesion strengths of cement-based powders like tile adhesives, tile grouts, screeds & cement plasters. Tile Key is particularly recommended for the surface preparation of difficult to tile substrates or for heavy duty tiling applications that require exceptional adhesion and compressive strength.
Features
- Waterproofs cement-based products
- Increases adhesion to difficult substrates
- Increases flexibility
Tile Grout
Tile Tak Wall & Floor Tile Grout (Supplied in 5kg/20kg bags)
(Colours – Lt Grey/Dove Grey, White, Biscuit & Beige)
Tile Tak Wall & Floor Tile Grout is a specially formulated cement- based polymer modified grouting compound designed to grout tile grout joints up to a width of 8mm. Tile Tak Tile Grout incorporates additives that improve the flexural strength of the grouting medium with increased water resistance & minimal shrinkage. Tile Tak Tile Grout can be used to grout wall & floor tiles up to a maximum grout joint width of 8mm. The tile grout may also be used for grouting tiles in intermittently wet conditions.
Ready Mixed Tile Adhesive
Tile Flex (Supplied in 1kg/5kg buckets)
Tile Flex is a ready to use highly flexible, thin bed latex-based paste designed for the installation of lightweight tiles onto flexible surfaces (i.e., wall partitioning & wood). Tile Flex has excellent grip which eliminated slump when installing wall tiles. Having excellent grip tiles can be installed up-side down (window reveals etc.) Tile Flex must not be used in wet conditions nor on floors. When using Tile Flex the adhesive can be applied up to -3-5mm thick and can also be applied in a solid bed.
Water Proofing
Tile Tak Acrylic Waterproofing (Supplied in 1lt/5lt/20lt buckets)
Tile Tak Acrylic Waterproofing is a single pack ready to use acrylic based waterproofing system suitable for waterproofing shower recesses, interior wet areas, parapet walls etc. The acrylic waterproofing is ready to use and may be applied using a brush or paint roller. Once cured the waterproofing system (incorporating the membrane) is flexible & will accommodate normal structural movement. Once cured the waterproofed area may tiled on using the correct tile adhesive type.
Tile Tak Chem Proof (Supplied in 1lt/5lt/20lt buckets)
Tile Tak Chem Proof is a synthetic latex admixture that has been designed to waterproof showers, retaining walls, balcony floors, concrete decks & flat roofs. Chem Proof is also a submerged waterproofing system for the waterproofing of ponds & other underwater applications. Once cured the waterproofing is sufficiently flexible to accommodate normal structural movement. Once cured the waterproofed area may be tiled on using the correct tile adhesive type. Once cured the waterproofed area may be tiled on using the correct tile adhesive type.